TE 30-C-AVR

Corded Rotary Hammers SDS-Plus

Includes drilling-only and chiseling-only modes for maximum versatility
Active Vibration Reduction (AVR) makes the tool less tiring to use – helping to increase daily productivity
Exceptionally high power-to-weight ratio
Superior working comfort thanks to perfect balance, low weight, compact design and low vibration
Ruggedly built from high-grade materials and components for unbeaten, extra-long lifetime

Rotary hammer contractor pkg TE 30-C-AVR: #3476294
Weight according EPTA-Procedure 01/2003: 9.3 lb.
Working mode: Hammer drilling, Drilling, Chiseling, Chisel setting
Hammer drilling diameter range: 3/16 - 1-3/32 in
Optimum Hammer drilling range: 13/32 - 25/32 in
Single impact energy: 2.4 ft-lbs
Hammer drilling RPM: 750 rpm
Full hammering frequency: 4080 impacts/minute
Functionality: Active Vibration Reduction (AVR), Chiseling, Removable chuck, Reverse mode, Depth gauge
Triaxial vibration value for hammer drilling into concrete (ah,HD): 12 m/s² 1
A-weighted emission sound pressure level: 90 dB (A) 2
Rated input power: 850 W

Drilling anchor and through-holes in concrete and masonry, diameter range 4-28 mm, recommended range 8-20 mm
Drilling anchor holes, openings in concrete, stone and masonry, diameter range 4-28 mm; recommended diameter range 12-20 mm
Light chiseling on brick and block, corrective chiseling and finishing on concrete
Drilling in wood and metal using the optional keyless chuck and drill bits with smooth shank up to 13 mm diameter
Driving anchor screws and concrete screw anchors